足彩进球彩18156期:Products

足彩进球彩奖金 > ProductsTEP Series is the Bismuth Telluride based thermoelectric modules for converting heat into electricity. It is designed to optimize its performance for around 200C heat source

足彩进球彩奖金 www.btlma.icu

The power module is designed and manufactured by our patented technology for converting heat source directly into electricity. The module is Bi-Te based thermoelectric module that can work at the temperature of as high as 330 °C (626 ℉) heat source continuously, and up to 400°C(752℉)intermittently. The thermoelectric module will generate DC electricity as long as there is a temperature difference across the module. The more power will be generated when the temperature difference across the module becomes larger, and the efficiency of converting heat energy into electricity will increase therefore. The module is stuck with the high thermal conductivity graphite sheet on its both sides of the ceramic plates to provide low contact thermal resistance, hence you do not need to apply thermal grease or other heat transfer compound when you install the module. The graphite sheet can work well in extremely high temperature.

 

 

TEP Series Thermoelectric Power Module

Part Number

The following specification are based on that tthe hot side temperature is at 300 ℃ and cold side at 30 ℃.

TEP1-1263-3.4

  • Size: 30 mm x 30 mm
  • Open circuit voltage: 10.8 volts
  • Matched load resistance: 5.4 ohms
  • Matched load output voltage: 5.4 volts
  • Matched load output current: 1.0 amperes
  • Matched load output power: 5.4 watts
  • Heat flow through the module: about 96 watts
  • Heat flux: about 10.7 watts/cm2
downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEP1-12635-3.4

  • Size: 35 mm x 35 mm
  • Open circuit voltage: 10.8 volts
  • Matched load resistance: 5.4 ohms
  • Matched load output voltage: 5.4 volts
  • Matched load output current: 1.0 amperes
  • Matched load output power: 5.4 watts
  • Heat flow through the module: about 94.7 watts
  • Heat flux: about 7.7 watts/cm2
downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEP1-1264-1.5

  • Size: 40 mm x 40 mm
  • Open circuit voltage: 9.4 volts
  • Matched load output resistance:2.8 ohms
  • Matched load output voltage: 4.7 volts
  • Matched load output current: 1.56 amperes
  • Matched load output power: 7.3 watts
  • Heat flow through the module: about 133 watts
  • Heat flux: about 8.4 watts/cm2

downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEP1-1264-3.4

  • Size: 40 mm x 40 mm
  • Open circuit voltage: 10.8 volts
  • Matched load output resistance: 5.4 ohms
  • Matched load output voltage: 5.4 volts
  • Matched load output current: 1.0 amperes
  • Matched load output power: 5.4 watts
  • Heat flow through the module: about 98.2 watts
  • Heat flux: about 6.2 watts/cm2

downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEP1-12656-0.6

  • Size: 56 mm x 56 mm
  • Open circuit voltage: 8.8 volts
  • Matched load output resistance: 1.19 ohms
  • Matched load output voltage: 4.4 volts
  • Matched load output current: 3.68 amperes
  • Matched load output power: 16.2 watts
  • Heat flow through the module: about 282 watts
  • Heat flux: about 9.0 watts/cm2
downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEP1-12656-0.8

  • Size: 56 mm x 56 mm
  • Open circuit voltage: 9.9 volts
  • Matched load output resistance: 1.67 ohms
  • Matched load output voltage: 5 volts
  • Matched load output current: 2.9 amperes
  • Matched load output power: 14.5 watts
  • Heat flow through the module: about 247 watts
  • Heat flux: about 7.9 watts/cm2
 downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEP1-1994-3.5

  • Size: 40 mm x 40 mm
  • Open circuit voltage: 13.4 volts
  • Matched load output resistance: 5.7 ohms
  • Matched load output voltage: 6.7 volts
  • Matched load output current: 1.12 amperes
  • Matched load output power: 7.5  watts
  • Heat flow through the module: about 137 watts
  • Heat flux: about 8.6 watts/cm2

downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEP1-24156-2.4

  • Size: 56 mm x 56 mm
  • Open circuit voltage: 17.7 volts
  • Matched load output resistance: 4.4 ohms
  • Matched load output voltage: 8.8 volts
  • Matched load output current: 2.0 amperes
  • Matched load output power: 17.6 watts
  • Heat flow through the module: about 301 watts
  • Heat flux: about 9.6 watts/cm2

downloadSpecification Sheet Download

downloadPower Module Installation Notes

 

If you did not find thermoelectric module that meets your requirements, we are ready to design the one at your request.

pk106码选号技巧 幸运飞艇全天6码两期计划 单双玩法nba 赌博电子游戏能赢钱吗 pk10计划人工在线计划网页版 后四一码不定位稳赚 北京pk拾全天人工计划 微信二人斗地主 聚富百视下载 3d打一个胆多少钱 电玩城注册送28元 取胆码的方法准确95% 大乐透最新规则 多赢彩站下载安装 时时彩20分钟开奖 北京pk10直播网站